Hepatitis B Virus

The Hepatitis B Virus can live and thrive in blood for up to seven days. Hepatitis B causes inflammation of the liver and can lead to more serious conditions such as cirrhosis and liver cancer. There is no cure or suitable treatment plan for Hepatitis B.

Biohazard Waste is Regulated

Federal Regulation 29CFR1910.1030 states that no employer can expose an employee to cleaning blood or bodily fluids without first providing:

1. Blood borne pathogen training
2. A written exposure control plan
3. Personal protective equipment
4. The opportunity to receive the Hepatitis B vaccine
5. Receive exposure evaluation and follow up
5. A method to remove, store and dispose of bio-hazardous waste

Non-compliance with 29CFR1910.1030 has resulted in OSHA fines ranging from $7,000 to $70,000.

Contact Us

Please don't hesitate to contact us at our toll free number or by email. We will take the time to listen to your individual and unique situation and offer advice concerning proper remediaton procedures.

7009 East 56th St., Ste F
Indianapolis, Indiana 46226
Phone: (800) 759-6960
Fax: (317) 549-9727
Email: Click to Email

Mold Remediation | Mold Removal

mold remediation and removal

Molds are organisms that may be found indoors and outdoors. They are part of the natural environment and play an important role in the environment by breaking down and digesting organic material, such as dead leaves. Also called fungi or mildew, molds are neither plants nor animals; they are part of the kingdom Fungi.

Molds can multiply by producing microscopic spores (2 - 100 microns [µm] in diameter), similar to the seeds produced by plants. Many spores are so small they easily float through the air and can be carried for great distances by even the gentlest breezes. The number of mold spores suspended in indoor and outdoor air fluctuates from season to season, day to day, and even hour to hour.

Mold spores are ubiquitous; they are found both indoors and outdoors. Mold spores cannot be eliminated from indoor environments. Some mold spores will be found floating through the air and in settled dust; however, they will not grow if moisture is not present.

Mold is not usually a problem indoors — unless mold spores land on a wet or damp spot and begin growing. As molds grow they digest whatever they are growing on. Unchecked mold growth can damage buildings and furnishings; molds can rot wood, damage drywall, and eventually cause structural damage to buildings. Mold can cause cosmetic damage, such as stains, to furnishings. The potential human health effects of mold are also a concern. It is important, therefore, to prevent mold from growing indoors.

Inhalation exposure to mold indoors can cause health effects in some people. Molds produce allergens (substances that can cause allergic reactions), irritants, and, in some cases, potentially toxic substances or chemicals (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Mold does not have to be alive to cause an allergic reaction. Dead or alive, mold can cause allergic reactions in some people.

Bio-Trauma 911, Inc. removes mold and restores your home or place of business to a safe and habitable environment. Bio-Trauma 911 works with several different insurance companies, therefore we are often able to bill your insurance company directly. If insurance covers the cost of our services, the only payment required from you will be your policy deductible. If insurance coverage is not available, we do offer several different payment plans, which generally suit most budgets.

Biohazard remediation help

What You Should Know About Mold

  1. Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
  2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
  3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
  4. Fix the source of the water problem or leak to prevent mold growth.
  5. Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
  6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
  7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
  8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
  9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
  10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.

Mold growth may be a problem after flooding. EPA's Fact Sheet: Flood Cleanup: Avoiding Indoor Air Quality Problems (PDF) (2 pp, 67 K, about PDF) discusses steps to take when cleaning and repairing a home after flooding. Excess moisture in the home is cause for concern about indoor air quality primarily because it provides breeding conditions for microorganisms. This fact sheet provides tips to avoid creating indoor air quality problems during cleanup. U.S. EPA, EPA Document Number 402-F-93-005, August 1993.

Moisture control is the key to mold control, the Moisture Control Section from Biological Pollutants in Your Home follows:/p>

  1. Fix leaks and seepage. If water is entering the house from the outside, your options range from simple landscaping to extensive excavation and waterproofing. (The ground should slope away from the house.) Water in the basement can result from the lack of gutters or a water flow toward the house. Water leaks in pipes or around tubs and sinks can provide a place for biological pollutants to grow.
  2. Put a plastic cover over dirt in crawlspaces to prevent moisture from coming in from the ground. Be sure crawlspaces are well-ventilated.
  3. Use exhaust fans in bathrooms and kitchens to remove moisture to the outside (not into the attic). Vent your clothes dryer to the outside.
  4. Turn off certain appliances (such as humidifiers or kerosene heaters) if you notice moisture on windows and other surfaces.
  5. Use dehumidifiers and air conditioners, especially in hot, humid climates, to reduce moisture in the air, but be sure that the appliances themselves don't become sources of biological pollutants.
  6. Raise the temperature of cold surfaces where moisture condenses. Use insulation or storm windows. (A storm window installed on the inside works better than one installed on the outside.) Open doors between rooms (especially doors to closets which may be colder than the rooms) to increase circulation. Circulation carries heat to the cold surfaces. Increase air circulation by using fans and by moving furniture from wall corners to promote air and heat circulation. Be sure that your house has a source of fresh air and can expel excessive moisture from the home.
  7. Pay special attention to carpet on concrete floors. Carpet can absorb moisture and serve as a place for biological pollutants to grow. Use area rugs which can be taken up and washed often. In certain climates, if carpet is to be installed over a concrete floor, it may be necessary to use a vapor barrier (plastic sheeting) over the concrete and cover that with sub-flooring (insulation covered with plywood) to prevent a moisture problem.
  8. Moisture problems and their solutions differ from one climate to another. The Northeast is cold and wet; the Southwest is hot and dry; the South is hot and wet; and the Western Mountain states are cold and dry. All of these regions can have moisture problems. For example, evaporative coolers used in the Southwest can encourage the growth of biological pollutants. In other hot regions, the use of air conditioners which cool the air too quickly may prevent the air conditioners from running long enough to remove excess moisture from the air. The types of construction and weatherization for the different climates can lead to different problems and solutions.


Additional Information

The services provided by Bio-Trauma 911, Inc. are in high demand. On a weekly basis, our technicians are traveling either within the State of Indiana or throughout the Midwestern United States. Although we would like to assist everyone who calls for help, calls outside of our service area may have to be referred to one of our affiliates.

As a training company, Bio-Trauma 911, Inc. is in the unique position to train and certify many of our affiliates. Therefore we know, when we have to refer our clients to someone else, they will receive the most professional service available.

Related Services

Blood Cleanup

Blood travels in much the same manner as water does and a casual inspection of the scene will not reveal all traces of blood. cleanup technicians . . .

Read More

Crime Scene Cleanup

Once removed, a body leaves behind both visual and microscopic traces that can prove harmful to those who may come into contact with them . . .

Read More

Help after Suicide

Suicide cleanup requires our technicians to follow the same process as described in Crime Scene Cleanup, with a few exceptions . . .

Read More